Arley Moss Supplies Blog - installation RSS Feed

The following step by step guide explains: How to find the right size tap for your installation.Tools needed: Tape measureTime needed: 1 minuteScroll to the bottom to see the video. Step 1: Measure the wall thickness, in this case it is 8" (203mm).The measurement is between the outer face of the drilled entry hole* to the outer face of the exit ..

The following step by step guide explains: How to install the Woodford Model 22 mixer tap.Tools needed: 1-1/8" (28mm) drill bit and Drill6mm drill bit & 2 securing screws and rawlplugsExternal silicone fillerMarker Adjustable SpannerTime needed: 30-60 minutesScroll to the bottom to see the video. Step 1: Mark the centres of both pipes (5" or 127..